Adjust The Mounting Tab:

Check if the LED bulbs are sitting at the right orientation after you install the bulb. If the bulbs are not in the correct orientation, you can adjust the mounting tab to correct the orientation.

For the Concept Series:

1. Observe the angle of the LED diodes and set to the correct angle if needed.

2. Locate the set screw on the LED bulb collar.

3. Use the hex wrench provided to loosen the set screw.

4. Rotate the collar to the required position to achieve correct installation alignment.

5. Tighten the set screw.

For the Xtreme Series:


Keywords: LED bulbs, Correct orientation, Mounting tab, LED diodes, Set screw, Hex wrench, Concept Series, Lighting performance, Headlight adjustment, Visibility.